DIY Grab-It Potholder

Projects

Another day of making potholders. Today it is the grab-it potholder. It slips on and looks like a puppet. Handy for grabbing a cookie sheet or muffin tin from the oven. Let’s get started…

Supplies:

material

quilter’s batting

thread

sewing machine

scissors

needle

thimble

copy paper (for making the pattern piece)

pencil

ruler

self-healing craft matt

rotary blade tool

Step 1: Make the pattern. This piece is basically an oval that fits your fingers. Fold a piece of paper in half then in half again. Make one side of the fold the width and the other the length. When unfolded all sides will be the same. My dimensions are roughly: 2.5″ width x 4.5″ length with a curved side. See photos.

Width 2 1/2″
length 4 1/2″

Step 2: Unfold pattern piece. Pin to fabric and cut 2 pieces. Pin to batting and cut 1 piece.

Step 3: Make the pocket pieces by folding the pattern piece in half (widthwise) and then folding down 1/2″. Pin to fabric and cut 4 pieces. Pin to batting and cut 2 pieces.

Step 4: With right sides together, sew two pocket material pieces together. Iron seams open. Place one batting piece inside and fold over. Repeat making one more pocket piece.

Pin pocket pieces together
Press pocket pieces, add batting, fold over

Step 5: Sew 1/2″ seam around pocket piece and keep going to quilt a maze design on pocket pieces. This keeps batting in tact through use and washing.

quilted pocket piece

Step 6: Sandwhich the main piece of batting between the two pieces of oval fabric with the right sides out. Stitch 1/2″ seam allowance around the edge. Quilt a bit on this piece as well. Simple straight lines will do just fine.

Step 6

Step 7: Now take the pocket pieces and pin to the oval. Sew around curves leave the straight sides open.

Step 7

Step 8: Cut a long strip of fabric 2 1/2 ” wide. The length should be longer than the oval…don’t worry about making it exact. It is better to have this too long so that it can be fitted and cut when almost finished sewing. After cutting the strip, fold one end 1/4″ under on width side. Now fold it in half lengthwise and press. Then pin just the start of the binding to the edge of the potholder with raw edges together. Do not pin the whole thing as the binding will have to be stretched and shaped to fit as it is being sewn. Sew in place with a 1/2″ seam. When almost to the end, cut the binding with an overlap and fold under 1/4″ and finish sewing.

Cut binding 2 1/2″ wide with self healing matt and rotary cutter or by hand is fine too
Fold and press
Pin just the beginning of binding to potholder
Cut binding when almost finished leaving an overlap. Oh and don’t forget to turn the end under (not shown in photo) for a finished look.

Step 9: Almost done! The machine part of the sewing is finished. Get out a needle, thread, thimble, and scissors to complete the potholder. Turn the binding to the back. It should just cover the seam stitch. Hold in place and with a threaded needle grab a tiny amount of fabric from the potholder and from the binding and whip stitch all aroung the potholder. Press the potholder to flatten it out and bit. Voila! Now you are ready to take those cookies out of the oven. Happy crafting!