Making Single Fold Bias Tape

Projects

I decided to make Simplicity’s pattern 4177, a simple Boho style blouse. The neckline called for 1/2″ single fold bias tape. Since I wanted to have my bias tape match my fabric, I set off to make my own bias tape. Good thing I had extra fabric.

To make bias tape, the fabric needs to be cut on the bias, a 45 degree angle from the selvage edge. This gives the fabric more stretch and can form to curves easier. By folding over the cut edge of the fabric to the selvage edge and then cutting along the fold line, the bias cut is made. From there, all cuts can be made parrallel to the bias cut in long strips. My bias was cut into one inch strips. Strips can be sewn together to reach the desired length.

fold side down to selvage edge- cut along angle

Once the strips are cut out, they are folded in half and pressed. For single fold bias tape, the sides are then brought in to meet the center fold and pressed. The tape is then pressed flat to erase the first center fold pressing.

A bit more work than picking up a package of the pre-made stuff but ever so worth it. For prints, such as I was using, a plain color would have looked “home made” and even though my top is home made I do not need to advertise the fact. If the pattern calls for bias tape that will show, be sure to purchase a bit more material to account for it if wishing to do it yourself.

As always, Happy Sewing!