Like to take water with you but don’t want to carry it? Can’t get anyone else to carry it for you? A water bottle holder is just the ticket. Sling it over your shoulder and you are ready to go.
I have made four of these water bottle holders. What I like about them is that you can personalize them to whatever pattern or color you like. They keep the water cool and the sweat from the bottle does not get all over the place. Mostly, I like that I do not have to hold the bottle and can have my hands free.
Materials needed: 1/4 yard cotton fabric, Insulin-Bright insulating material (www.warmcompany.com), one package of double fold bias tape quilt binding .875″ wide, thread, pins, sewing machine, iron.
The holder does not take much fabric and is easy to make. It can be customized to fit the size of bottle you have. For a standard size water bottle, cut 2 pieces of fabric and 1 piece of insulating material : 10 1/2 ” wide x 11 ” high.
Take the insulating material and place the two pieces of fabric with the fabric right sides together on top of it. Sew on the top side (10 1/2″ wide side) through all pieces using a 5/8″ seam allowance. Turn the top fabric piece to the other side of the insulating material. Now the piece should have the insulating material in the middle with fabric on either side, right side facing out. Smooth flat and pin the piece everywhere with quilting pins. The sewn side will be the top. Sew in one inch lines from top to bottom or quilt as desired. Fold in half so sides meet, sew lengthwise 5/8″ seam. Set aside.
Cut a piece of binding tape long enough to cover the unfinished edge of the holder and the desired length of the strap.
Now take the binding tape and open it up and enclose the seam with the tape. Pin to the unfinished edge of the holder. Sew up the side keeping close to the edge of the bias tape and keep going down the remainder of the tape. Next, place the end of the strap inside the holder and sew in place. Turn the body inside out.
Cut two circles of fabric and one circle of insulating material 4″ diameter. Place together with the right sides out and insulating material in the middle. Pin. Sew an x through the circle. Sew a 5/8″ seam around the edge.
Pin the bottom circle piece in place in the bottom edge of the right side of the holder and sew around. Turn to right side. Put a water bottle inside and enjoy!
(My bag is adapted from the pattern on: blog.ilovefabric.com)